Keysight N9030B - Page 40

Table Of Contents
3.8.14 Sweep 1355
3.8.14.1 Sweep/Control 1355
Sweep Time 1355
Minimum Acquisition Time 1357
Sweep/Measure 1358
Restart 1360
Pause/Resume 1363
Abort (Remote Command Only) 1363
Sweep Time Annotation (Remote Query Only) 1364
3.8.14.2 Sweep Config 1364
Sweep Time Rules 1364
Points 1365
3.8.14.3 X Scale 1366
Auto Scaling 1367
3.8.15 Trace 1367
3.8.15.1 Select Trace 1367
3.8.15.2 Trace Control 1368
Trace Type 1368
Clear and Write | Restart Averaging | Restart Max/Min Hold 1373
View/Blank 1374
3.8.15.3 Math 1376
Math Function 1377
Operand 1 / Operand 2 1383
Offset 1384
Reference 1384
3.8.15.4 Detector 1384
Detector 1384
Detector Select Auto/Man 1386
3.8.15.5 Trace Function 1387
From Trace 1387
To Trace 1387
Copy 1387
Exchange 1388
Preset All Traces 1388
Clear All Traces 1388
3.8.15.6 Advanced 1389
Measure Trace 1389
3.9 SEM Measurement 1390
3.9.1 Results for n = 1 1392
3.9.2 Results for n = 2-4 1393
3.9.3 Results for n = 5 1393
40 Vector Modulation Analyzer Mode User's &Programmer's Reference