4 Installation Note N9030-90111
Option 107, Audio Input and Digitizer Upgrade Kit
Introduction
This kit provides all parts and instructions necessary to install Option 107, Audio Input and
Digitizer, into the Keysight N9030B.
1. This upgrade kit is not compatible with N9030B PXA signal analyzers with any
of the following options currently installed:
N9030B-B5X - 510 MHz Analysis Bandwidth
N9030B-BBA - I/Q Baseband Inputs
2. This upgrade kit installation requires that you re-install instrument software.
The latest revision of the PXA Signal Analyzer software may be downloaded
from
http:/www.keysight.com/find/xseries_software
The instrument software must be installed AFTER the hardware in the kit is
installed. Follow the procedure in this document for redeeming and installing
the option upgrade license key.
3. The option is licensed for one instrument model/serial number combination.
The license key will only install on the designated instrument.
To Next Page
Loading...
