Keysight N9030B - Page 40

Table Of Contents
3.10.1.2 All Ranges 1357
3.10.2 Windows 1358
3.10.2.1 Graph 1358
3.10.2.2 Table 1359
3.10.2.3 All Range Table 1360
3.10.2.4 Gate 1361
3.10.2.5 Marker Table 1361
3.10.3 Amplitude 1361
3.10.3.1 Y Scale 1361
Ref Value 1362
Scale/Div 1362
Scale Range 1363
Ref Position 1363
Auto Scaling 1363
3.10.3.2 Attenuation 1364
Full Range Atten 1366
Mech Atten 1367
Elec Atten 1370
Adjust Atten for Min Clipping 1374
Adjust Atten 1374
Pre-Adjust for Min Clipping 1375
Mech Atten Step 1379
3.10.3.3 Range (Non-attenuator models) 1380
Range 1380
Adjust Range for Min Clipping 1381
Pre-Adjust for Min Clipping 1381
Peak-to-Average Ratio 1382
Mixer Lvl Offset 1383
3.10.3.4 Signal Path 1383
Presel Center 1383
Preselector Adjust 1385
Internal Preamp 1386
LNA 1387
µW Path Control 1389
Software Preselection 1398
SW Preselection Type 1399
SW Preselection BW 1400
High Freq Prefilter 1401
3.10.4 BW 1402
3.10.5 Display 1402
3.10.5.1 Meas Display 1402
Center Frequency On/Off 1403
40 Short Range Comms & IoT Mode User's &Programmer's Reference