Table Of Contents
4.3.7.6 Backlight Intensity 1775
4.3.7.7 Hints 1775
4.3.7.8 Numeric Entry Auto Open 1775
4.3.7.9 Touch On/Off 1776
4.3.7.10 Control Size 1776
4.3.7.11 Quick Save Mode 1776
4.3.7.12 Screen Tabs Left/Right 1777
4.3.7.13 Hide Screen Tabs in Full Screen 1778
4.3.7.14 2-Screen Orientation 1779
4.3.7.15 Clock Format 1780
4.3.7.16 Language 1781
4.3.7.17 Restore User Interface Defaults 1781
4.3.7.18 User Interface Type (Remote Query Only) 1782
4.4 Power On 1783
4.4.1 Power On State 1783
4.4.2 Power On Application 1785
4.4.3 FPGA Configuration 1785
4.4.3.1 FPGA Load Preference 1788
4.4.3.2 Load FPGA 1789
4.4.4 Restore Power On Defaults 1790
4.4.5 Configure Applications – Desktop application 1790
4.4.6 Configure Applications - Instrument boot-up 1793
4.4.7 Configure Applications - Remote Commands 1793
4.4.7.1 Configuration list (Remote Command Only) 1794
4.4.7.2 Configuration Memory Available (Remote Query Only) 1794
4.4.7.3 Configuration Memory Total (Remote Query Only) 1794
4.4.7.4 Configuration Memory Used (Remote Query Only) 1795
4.4.7.5 Configuration Application Memory (Remote Query Only) 1795
4.5 Restore Defaults 1796
4.5.1 Input/Output 1796
4.5.2 I/O Config 1797
4.5.3 User Interface 1797
4.5.4 Power On 1797
Short Range Comms & IoT Mode User's &Programmer's Reference 53
To Next Page
Loading...
