Table Of Contents
4.6.2.23 Align High Band 1826
4.6.3 Path Delay Calibration 1827
4.6.3.1 Source Path Delay Calibration 1827
4.6.3.2 Path Delay Correction On/Off(Remote Command only) 1829
4.6.4 Show Alignment Statistics 1829
4.6.5 Timebase DAC 1841
4.6.5.1 Timebase DAC 1841
4.6.5.2 User Value 1842
4.6.6 Advanced 1843
4.6.6.1 Characterize Preselector 1843
4.6.6.2 Characterize Reference Clock 1845
4.6.6.3 Characterize Noise Floor 1847
4.6.6.4 Calibration Temperature History 1849
4.6.6.5 TDS Alignment 1850
4.6.6.6 Backup or Restore Align Data… 1851
Alignment Data Wizard (without Flash) 1852
Perform Backup (without Flash) (Remote Command Only) 1861
Perform Restore (without Flash) (Remote Command Only) 1861
Alignment Data Wizard (with Flash) 1862
Perform Backup (with Flash) (Remote Command Only) 1867
Perform Restore (With Flash) (Remote Command Only) 1867
Restore Alignment Defaults 1867
4.6.6.7 oGRF Preselector 1868
Align Now, 20 Hz to 30 MHz 1868
Align Now, 30 MHz to 3.6 GHz 1869
Align Now, 20 Hz to 3.6 GHz 1870
Alert 1871
4.6.6.8 Scheduler 1872
Schedule Setup 1872
Task 1872
Date/Time 1873
Hour 1874
Minute 1874
Recurrence 1874
Number of Weeks 1874
Day 1875
4.7 Licensing 1876
4.7.1 License Manager 1876
4.7.2 System Software Version Date 1876
Short Range Comms & IoT Mode User's &Programmer's Reference 55
To Next Page
Loading...
