Table Of Contents
Step Configuration of Frequency/Channel Number parameter list (Remote Command
Only) 1952
Step Configuration of Power parameter list (Remote Command Only) 1952
Step Configuration of Waveform parameter list (Remote Command Only) 1953
Step Configuration of Step Duration parameter list (Remote Command Only) 1954
Step Configuration of Duration Time or Play Count parameter list (Remote Command
Only) 1954
Step Configuration of Output Trigger parameter list (Remote Command Only) 1955
Clear List (Remote Command Only) 1955
6.1.8.8 Remote Software Trigger (Remote command Only) 1956
6.1.8.9 Query List Sequence Initiation Armed Status (Remote Query
Only) 1956
6.1.9 Frequency Setup 1956
6.1.9.1 Frequency 1956
6.1.9.2 Channel 1959
6.1.9.3 Radio Setup 1963
Radio Standard/Radio Band 1964
Radio Band Link 1968
6.1.9.4 Set Reference Frequency 1968
6.1.9.5 Freq Reference 1969
6.1.9.6 Freq Offset 1970
6.1.9.7 Freq Increment 1971
6.1.9.8 Rx/Tx Coupling 1972
6.1.9.9 Rx/Tx Offset 1973
6.1.10 Modulation 1973
6.1.11 Modulation Setup 1974
6.1.11.1 AM 1974
6.1.11.2 AM Mod Depth 1974
6.1.11.3 AM Rate 1974
6.1.11.4 AM Rate Increment 1975
6.1.11.5 FM 1975
6.1.11.6 FM Deviation 1976
6.1.11.7 FM Rate 1976
6.1.11.8 FM Rate Increment 1976
6.1.11.9 PM 1977
6.1.11.10 PM Deviation 1977
6.1.11.11 PM Rate 1977
Short Range Comms & IoT Mode User's &Programmer's Reference 59
To Next Page
Loading...
