Table Of Contents
6.5.14 Merge Correction Data (Remote Command Only) 2140
6.5.15 Set (Replace) Data (Remote Command Only) 2141
6.5.16 Correction Group Range Data (Remote Command Only) 2141
6.5.17 Delete Correction Group Range (Remote Command Only) 2142
6.6 Freq Ref Input 2143
6.6.1 Freq Ref Input 2143
6.6.2 Ext Ref Freq 2148
6.6.3 Default External Ref Freq 2149
6.6.4 LO Ref Input 2149
6.6.5 Ref Lock BW 2150
6.6.6 Reference Oscillator On/Off (Remote Command Only) 2151
6.6.6.1 Select Ref 2151
6.6.6.2 Freq Ref In 2152
6.6.6.3 External Freq Ref 2152
6.6.6.4 Ext Ref Locked (Remote Query Only) 2152
6.7 Output 2154
6.7.1 Analog Out 2154
6.7.2 Screen Video Level 2158
6.7.3 Digital Bus Out 2159
6.7.4 Wideband Digital Bus 2159
6.7.5 Data Stream 2162
6.7.6 I/Q Cal Out 2162
6.7.7 Aux IF Out 2163
6.7.8 Arbitrary IF Freq 2165
6.7.9 Ext/Wide IF Out 2165
6.7.10 IF2 Out 2166
6.7.11 REF Out 2167
6.7.12 LO Ref Out 2167
6.8 Trigger Output 2169
6.8.1 Trig 1 – 4 Out 2169
6.8.2 Trig 1 – 4 Out Polarity 2171
6.8.3 Trig 1 – 4 Out Device 2172
6.8.4 Src PXI Trig Out 2172
66 Short Range Comms & IoT Mode User's &Programmer's Reference
To Next Page
Loading...
