3 Spectrum Analyzer Mode
3.8 Spurious Emissions Measurement
Packet Type (Bluetooth only)
The command below sets the packet type for the Bluetooth measurement
Remote
Command
[:SENSe]:RADio:STANdard:PACKet DH1 | DH3 | DH5
[:SENSe]:RADio:STANdard:PACKet?
Example
:RAD:STAN:PACK DH1
:RAD:STAN:PACK?
Notes The packet length is:
DH1
366 µs
DH3
1622 µs
DH5
2870 µs
Preset
DH1
State Saved Saved in instrument state
Range
DH1|DH3|DH5
Radio Standard Presets Hierarchy
General None
TETRA BTS
MS
FCC Part 15 Subpart F
APCO-25
DMR
dPMR
Video DVB-T L/SECAM/NICAM
G/PAL/NICAM
I/PAL/NICAM
S-DMB System E
Spectrum Analyzer Mode User's &Programmer's Reference 1483
To Next Page
Loading...
