Need help?Do you have a question about the Keysight U9361C and is the answer not in the manual?
Explains CAUTION and WARNING hazard notices for safe operation.
Details Keysight's warranty terms and conditions for the product.
Outlines the license terms for using the product's hardware and software.
Specifies U.S. government rights concerning commercial computer software.
Introduces the U9361x RCal Receiver Calibrator and its benefits.
Lists the necessary equipment, software, and licenses for RCal operation.
Details the different RCal models, frequency ranges, and connector types.
Explains the RCal module's connectors and their functions.
Describes the status messages indicated by the RCal module's LEDs.
Introduces the RCal software interface for configuration.
Guides on performing and applying RCal calibrations.
Provides guidelines for maintaining RCal connectors for optimal performance.
Describes how to connect the signal generator, RCal, and signal analyzer.
Step-by-step instructions for performing a basic magnitude calibration.
How to perform magnitude calibration with multiple instrument states.
Performing complex calibration on QAM signals to improve EVM.
Demonstrates using RCal data with the 89600 VSA software.
Using RCal to generate CW and comb signals.
Detailed steps for integrating and using RCal with 89600 VSA.
Compares amplitude accuracy achieved with RCal versus a power sensor.
Using RCal to emulate a scalar network analyzer for frequency response plotting.
MATLAB script to perform magnitude calibration and compare it with current measurements.
MATLAB script to populate a calibration row with VMA settings.
To Next Page
General