Keysight U9361C - 2 Making Measurements

25
Keysight Vector Signal Generator
U9361C/F/G/M RCal Receiver Calibrator
Measurement Guide
2 Making Measurements
The following topics can be found in this section:
— “Equipment Setup” on page 26
— “Performing a Simple Magnitude Calibration” on page 29
— “Measuring Magnitude Cal with Multiple States” on page 34
— “Using Complex Cal to Improve EVM in a 128 QAM Signal” on page 42
— “Using RCal Data Generated on X-Apps but Used with the 89600 VSA
Software” on page 48
— “Using RCal as a CW Source and Comb Generator” on page 53
— “Using RCal Directly from the 89600 VSA” on page 56
— “Comparing Amplitude Accuracy using RCal vs. a Power Sensor” on
page 65
— “Using RCal as a Scalar Network Analyzer” on page 74