56 U9361C/F/G/M RCal Measurement Guide
Making Measurements
Using RCal Directly from the 89600 VSA
Using RCal Directly from the 89600 VSA
In the latest 89600 VSA 2024 Patch Release, integration with the RCal U9361
receiver calibrator is possible with any Keysight hardware that communicates
with the VSA, including oscilloscopes, digitizers and signal analyzers. Making it
possible to perform a comprehensive receiver system calibration right up to the
DUT reference plane. Moreover, the calibration coefficients can be seamlessly
applied across all 89600 VSA measurements, including but not limited to
Digital Demod, Flex Frame, Custom OFDM, 5G NR, and DVB-S2X.
Licensing Requirements for RCal with 89600 VSA
To integrate the U9361 RCal with the 89600 VSA, you will need the
89601200C license on the same PC where the VSA software is installed. This
license supports all the Keysight hardware instruments compatible with the
VSA, including but not limited to:
— X-Series Signal Analyzers, such as the UXA, PXA, and MXA
— Oscilloscopes, such as the UXR and MXR
— PXI Modular Analyzers and Transceivers
— Digitizers, such as the M5302A
To Next Page
Loading...