3
Keysight Vector Signal Generator
U9361C/F/G/M RCal Receiver Calibrator
Measurement Guide
1 Getting Started
This section explains how to setup and initialize the Frequency Extender with
the Vector Signal Generator.
The following topics can be found in this section:
“Overview” on page 4
“RCal I/O” on page 6
“LED Indicators on RCal Module” on page 8
“RCal Software - Configuration” on page 9
“RCal Software – Calibration and Application” on page 16
“Connector Care” on page 22
To Next Page
Loading...