Keysight N9038B - Page 2205

5 Preset
Type Of Preset SCPI Command Scope of Preset Front Panel
Access
Interface Defaults"
on page 2083
Interface” group
Does not preset the RF Source
Defaults
User Interface
tabs
"Restore Power
On Defaults" on
page 2092
:SYSTem:DEFault PON
Affects all variables in the ”Power On”
group
Presets the RF Source
System > Restore
Defaults
Power On tabs
"Restore
Alignment
Defaults" on page
2169
:SYSTem:DEFault ALIGn
Affects all variables in the
”Alignments” group
Presets the RF Source
System > Restore
Defaults
Alignments tabs
"Restore Defaults"
on page 2098
(Misc)
:SYSTem:DEFault MISC
Affects various variables not reset by
other commands
Presets the RF Source
System > Restore
Defaults
"Restore Defaults"
on page 2098 (All)
:SYSTem:DEFault [ALL]
:SYSTem:PRESet:PERSistent
Affects all variables
Presets the RF Source
System > Restore
Defaults
Spectrum Analyzer Mode User's &Programmer's Reference 2205