3 Spectrum Analyzer Mode
3.2 Swept SA Measurement
Analyzer Trigger 1 Out: Triggers the external source to step to next point in the
frequency step/list.
Analyzer Trigger 1 In: Triggers the analyzer to make a measurement on this point
Source Trigger In (or “Trig 1” at default setting for N5181B/82B, N5183B MXG or
N5171B/72B, N5173B EXG):
Triggers the source to step to the next point.
Source Trigger Out (or “Trig 2” at default setting for N5181B/82B, N5183B MXG or
N5171B/72B, N5173B EXG): Indicates that the source has settled.
IO interface Connection: instrument can connect to sources with its GPIB, USB or
LAN interface.
Spectrum Analyzer Mode User's &Programmer's Reference 463
To Next Page
Loading...
