Keysight N9038B - Page 997

3 Spectrum Analyzer Mode
3.5 ACP Measurement
Example
:ACP:OFFS:INN:TYPE ETOC
:ACP:OFFS:INN:TYPE?
Preset
STOCenter
State Saved Saved in instrument state
Range
CTOCenter|CTOEdge|ETOCenter|ETOEdge|STOCenter|STOEdge
Mode: 5G NR
Remote
Command
[:SENSe]:ACPower:OFFSet[1]|2:INNer:TYPE CTOCenter | CTOEdge | ETOCenter |
ETOEdge | STOCenter | STOEdge | SCTOCenter
[:SENSe]:ACPower:OFFSet[1]|2:INNer:TYPE?
Subopcode: 1 = BTS/Downlink (Default), 2 = MS/Uplink
Example
:ACP:OFFS:INN:TYPE ETOC
:ACP:OFFS:INN:TYPE?
Preset
STOCenter | CTOCenter
State Saved Saved in instrument state
Range
CTOCenter | CTOEdge | ETOCenter | ETOEdge | STOCenter | STOEdge | SCTOCenter
Spectrum Analyzer Mode User's &Programmer's Reference 997