Keysight U1233A - Understanding the Rotary Switch

U1231A/U1232A/U1233A Handheld Multimeter
Understanding the Rotary Switch
4 U1231A/U1232A/U1233A Quick Start Guide
Understanding the Rotary Switch
NOTE
Some rotary switch positions have a shifted function printed in
orange. Press to switch between the shifted and regular
function.
Legend Functions shown in the primary display
Low input impedance — VZ
LOW
Auto (AC or DC)/
VZ
LOW
DC V/VZ
LOW
AC V for eliminating ghost voltages
AC V/Frequency
DC V
Resistance/Short continuity/Open continuity
[1]
Diode
Capacitance/Temperature (U1233A only)
Capacitance/Auxiliary Temperature (U1232A only)
Capacitance (U1231A only)
DC or AC A/Frequency
DC or AC μA/Frequency
Clamp-on AC or DC A/Frequency (U1231A only)
Auxiliary Temperature (U1231A only)
[1]
Open continuity option must be enabled through the multimeter’s Setup
( > ). Open continuity is disabled by default.
WARNING
Remove the test leads from the measuring source or
target before changing the rotary switch position.
Refer to the U1231A/U1232A/U1233A User’s Guide for a
complete list and description of all rotary switch labels for
each separate multimeter model.
S
h
i
f
t
E
s
c
Hz
AUX
Hz
Hz
AUX
Hz
AUX