KeySonic ACK-540 RF User Manual

Version 1.1 (2008/06/05) ● © 2008 by MaxPoint Handelsges. mbH
Federal Communications Commission (FCC) Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications, However, there is no guarantee that interference will not occur in particular installations If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the distance between the mouse and receiver.
3. Connect the equipment into an outlet on a circuit different from that the receiver is connected.
CAUTION:
Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.

KeySonic ACK-540 RF Specifications

General

Brand	KeySonic
Model	ACK-540 RF
Category	Keyboard
Language	English

Summary

Declaration of Conformity

Introduction ACK-540 RF

Special Features

Lists key features like wireless operation, integrated touchpad, and ergonomic design.

Technical Data

Provides detailed specifications including dimensions, power, and compatibility.

Installation

System Requirements

Specifies required operating systems and notes no special driver installation.

USB Receiver Installation

Details connecting and installing the USB receiver for Plug & Play operation.

Keyboard Installation and Synchronization

Guides on inserting batteries, initial setup, and re-synchronizing the keyboard with the receiver.

How to Use the Keyboard

Special Operation Modes

Explains Sleep-Mode, Wake up-Mode, and Re-Connect-Mode for power saving and connectivity.

Touchpad Usage

Details how to use the touchpad for navigation, clicking, and scrolling.

Keys with Double Functions

Explains the dual-function keys, especially the Fn key and virtual numeric keypad.

How to Clean the Keyboard