KeySonic KSK-3200 RF - User Manual

Version 1.1 (2011/02/14) ● © 2011 by MaxPoint Handelsges. mbH
Federal Communications Commission (FCC) Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications, However, there is no guarantee that interference will not occur in particular installations If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the distance between the mouse and Receiver.
3. Connect the equipment into an outlet on a circuit different from that the Receiver is connected.
CAUTION:
Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.

Summary

Declaration of Conformity

Product and Regulatory Compliance

Details product type, brand, model, and compliance with EMC and R&TTE Directives, including listed standards.

Federal Communications Commission (FCC) Notice

FCC compliance statement, conditions for operation, and measures to mitigate harmful interference.

1. Introduction KSK-3200 RF

1.1 SPECIAL FEATURES

Highlights wireless features, trackball, design, functionality, and suitability for various environments.

1.2 Technical data

Provides specifications including key count, life expectancy, transmission frequency, power, temperature, and compatibility.

2. Installation

2.1 System Requirements

Specifies the required operating systems (Windows 98SE/ME/2000/XP/Vista/7) for keyboard installation.

2.2 Installation of the USB receiver

Guides on connecting the USB receiver, Plug & Play recognition, and troubleshooting for older systems.

2.3 Installation of the keyboard

Instructions for inserting batteries, switching power on, and initial synchronization verification.

2.4 New-synchronisation of the radio channel

Explains how to re-synchronize the keyboard and receiver, and provides troubleshooting steps.

3. How to use the keyboard

3.1 Meaning of status LEDs

Describes the function of the Pairing/Transmitting, Battery Low, and Recharging LEDs.

3.2 Special operation modes of the keyboard

Explains Sleep-Mode for battery saving and Wake-up mode activation.

3.3 Optical trackball

Details on using the trackball for cursor movement, clicking, dragging, and adjusting speed/resolution.

3.4 Keys with double functions

Explains the virtual numeric keypad function and the use of Fn key for integrated position keys.

4. How to clean the keyboard

Cleaning Instructions and Battery Disposal

Provides guidance on cleaning the keyboard and information on the disposal of old batteries.

KeySonic KSK-3200 RF Specifications

General

Key Switch	Membrane
Battery Type	2x AAA
Color	Black
Connection	Wireless RF
Operating System Compatibility	Windows