To Next Page
C
Christopher JonesSep 8, 2025
How to fix looseness in Ki Mobility Mobility Aid chair?
- KKevin JamesSep 8, 2025
To address looseness in your Ki Mobility Mobility Aid chair, ensure that all fasteners are tightened.
How to fix looseness in Ki Mobility Mobility Aid chair?
To address looseness in your Ki Mobility Mobility Aid chair, ensure that all fasteners are tightened.
What to do if Ki Mobility Mobility Aid will not tilt or rattles when tilting?
If your Ki Mobility Mobility Aid chair will not tilt or rattles when tilting, ensure all tire pressures are correct and equal on both sides of the chair. Also, make sure all fasteners are tightened. Apply a Teflon® based lubricant (such as Tri- Flow®) between modular frame components. Ensure the cable/foot tilt mechanism is adjusted and cogs disengage teeth. Inspect roller bearings for wear and replace if necessary. Inspect rotary frame bearing surfaces for damage and clean as necessary. Finally, optimize the CG setting.
Why is my Ki Mobility Mobility Aid sluggish in turning?
If you notice sluggishness when turning your Ki Mobility Mobility Aid, try adding a spacer washer between the caster stem and the bottom caster housing bearing on either the left or right side of the chair.
What causes caster flutters in Ki Mobility Mobility Aid?
Caster flutters in your Ki Mobility Mobility Aid can be due to tire pressure issues. Ensure all tire pressures are correct and equal on both sides of the chair.
General| Product Category | Wheelchair |
|---|---|
| Brand | Ki Mobility |
| Model | Focus CR |
| Frame Type | Folding |
| Material | Aluminum |
| Weight Capacity | 250 lbs |
| Frame Material | Aluminum |
| Folding | Yes |
| Adjustable Backrest | Yes |
| Adjustable Footrest | Yes |
| Seat Depth | 14" - 20" |
| Weight | 28 lbs |
| Wheel Size | 24" |
