EasyManua.ls Logo

Kia 2018 Stinger - Emergency Towing; Removable Towing Hook

Kia 2018 Stinger
560 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
625
What to do in an emergency
When towing your vehicle in an
emergency without wheel dollies :
1. Set the Engine Start/Stop button
to ACC position.
2. Place the transaxle shift lever in N
(Neutral).
3. Release the parking brake.
Removable towing hook
1. Open the liftgate, and remove the
towing hook from the tool case.
2. Remove the hole cover pressing
the right side part or lower part of
the cover on the bumper.
3. Install the towing hook by turning it
clockwise into the hole until it is
fully secured.
4. Remove the towing hook and
install the cover after use.
Emergency towing
If towing is necessary, have it
done by an authorized Kia dealer
or a commercial tow truck service.
CAUTION - Towing gear
position
Failure to place the transaxle
shift lever in N (Neutral) may
cause internal damage to the
transaxle.
OCK067017
OCK067019
OCK067020
Front
Rear

Table of Contents

Related product manuals