Kia D9062 ADUP0 - Post-Installation Checks; Visual Check List

Genuine Accessories
Visual Check
Side dash trim panel
Fuse panel access cover
Item to be Checked
Lower dash trim panel
Door seal
Harness
A-pillar trim panel
Ground bolt
Panel is securely in place.
Panel is securely in place.
Panel is securely in place.
All connectors attached are properly re-connected.
Battery cable is correctly fastened to the negative terminal. Nut is properly
torqued.
Seal is properly replaced, and not wrinkled.
Result
Panel is securely in place.
Ensure A-pillar tether clip is properly installed and
seated in the A-pillar correctly.
Hook is properly secured in place, and screw is tightened.
Mirror Torx screw replaced and re-tightened
Negative battery terminal re-tightened
Mirror harness connectors are properly connected.
T-Tap spade connectors are properly seated.
Harness is tucked into the headliner without causing a bulge or interference.
Screw is tightened and properly torqued.
Bolt is tightened and properly torqued.
Sun visor hook
*550-0670-000*
550-0670-000 Rev. 004
Revision Date
11/23/2015
Page 15 of 17