Disable Direct Hazards / Safety Regulations
If previously mentioned methods of disabling the vehicle’s system are unsuccessful, any
emergency
procedures involving the electric vehicle may cause the accidental
deployment of undeployed airbags and electric shock from high
-voltage components.
5. Disconnect the 12V battery and disable the high voltage battery by referring to page 9, 10.
Before engaging in any emergency response procedures, ensure the vehicle is
disabled and wait 5 minutes to allow the capacitor in the high voltage system to
discharge to avoid electrocution.
• Exposed cables or wires may be visible inside or outside the vehicle. Never touch
the metal chassis wires, cables, connectors, or any electric components before
disabling the system.
Failure to follow these instructions will lead to serious bodily injury
or death by
12
WARNING
To Next Page
Loading...
