Features of your vehicle
924
D280600AEN
Digital clock
Whenever the battery terminals or relat-
ed fuses are disconnected, you must
reset the time.
When the ignition switch is in the ACC or
ON position, the clock buttons operate as
follows:
D280601ATD
• HOUR (1) :
Pressing the H button will advance the
time display by one hour.
D280602ATD
• MINUTE (2) :
Pressing the M button will advance the
time display by one minute.
D280604ATD
• Display conversion:
To change the 12 hour format to the 24
hour format, press the H and M button
at the same time for more than 4 sec-
onds.
For example, if the time is 10:15 p.m.,
the display will change to 22:15.
Outside thermometer
The current outside temperature is dis-
played in 1°F (1°C) increments.The tem-
perature range is between -40°F ~ 140°F
(-40°C ~ 60°C).
• The outside temperature on the display
may not change immediately prevent
the driver from being distracted.
OTD041124N
WARNING
Do not adjust the clock while driv-
ing. You may lose your steering
control and cause severe personal
injury or accidents.
OTD041230L
OTD049203L
■ Type A
■ Type B
To Next Page
Loading...
