Why my Kia LAN2100EKXM cannot identify current location?
If your Kia Car Navigation system cannot identify your current location, ensure the product is connected to a power source and that your vehicle is in a location where the sky is clearly visible. If surrounded by high buildings or trees, move to a location with fewer obstructions.
Why is there no sound from my Kia LAN2100EKXM Car Navigation system?
If there's no sound from your Kia Car Navigation system, first, adjust the volume level. If the volume is already at an audible level, check to see if the mute function is enabled and turn it off.
Why is there no guidance voice on my Kia LAN2100EKXM Car Navigation system?
If you're not getting any guidance voice from your Kia Car Navigation system, make sure the guidance volume isn't too low. Also, check if the mute function is turned on and disable it.
Why playback is not possible on Kia LAN2100EKXM Car Navigation system?
If your Kia Car Navigation system is unable to play media, make sure the disc is clean and that it is a supported type. Ensure the disc is inserted correctly with the label facing upward, and verify that the files on the disc are in a compatible format.
What to do if my Kia LAN2100EKXM power does not turn on?
If your Kia Car Navigation system isn't turning on, try these steps: 1. Ensure the ignition switch is turned to the ON position. 2. If that doesn't work, set the ignition switch to ACC. 3. Make sure the unit is powered on by pressing the control panel. 4. If it still doesn't work, try turning the unit off and then on again. 5. As a last resort, reset the unit by pressing the RESET hole with a sharp object.
Why is the path guide different from the actual path on Kia LAN2100EKXM?
The path guide on your Kia Car Navigation system might differ from the actual path in several situations: * When the road is closely parallel. * When the splitting road angle is very small. * When there is an adjacent road when turning. * When driving on a road that is narrowing fast. * When driving through mountains or where the road is too curvy. * When the starting, passing and arriving locations are too close within 1km. * When you have set the starting, passing, or arriving locations more than 1km away from the road. * When driving through tunnels.
General| Brand | Kia |
|---|---|
| Model | LAN2100EKXM |
| Category | Car Navigation system |
| Language | English |
Details technical specifications for the car navigation system's hardware and features.
Details components and functions of the car navigation system's front control panel.
Presents a high-level functional diagram of the car navigation system's architecture.
Lists and describes the pin assignments for audio connectors.
Addresses common issues and solutions related to navigation and GPS functions.
To Next Page
