Safety features of your vehicle
244
ISOFIX anchorage and top-tether anchorage (ISOFIX
anchorage system) for children
僅 Never attach more than one Child
Restraint System to a single anchor
-
age. This could cause the anchor or
attachment to come loose or break.
僅 Always have the ISOFIX (i- Size) sys
-
tem inspected by your dealer after an
accident. An accident can damage the
ISOFIX system and may not properly
secure the Child Restraint System.
Securing a Child Restraint System
seat with "Top-tether Anchorage"
system
Type A
Type B
Operation
1. Route the Child Restraint System seat
strap over the seatback.
2. Connect the top-tether to the top-
tether anchorage,
3. Tighten the top-tether according to
the instructions of your Child
Restraint System's manufacturer.
Take the following precautions when
installing the top-tether:
僅 Read and follow all installation
instructions provided with your Child
Restraint System.
僅 Never attach more than one Child
Restraint System to a single ISOFIX
top-tether anchorage. This could
cause the anchorage or attachment to
come loose or break.
僅 Do not attach the top-tether to any
-
thing other than the correct top-tether
anchorage. It may not work properly if
attached to something else.
僅 Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
Child restraints. Under no circum
-
stances are they to be used for adult
seat belts or harnesses or for attach
-
ing other items or equipment to the
vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
Operation
1. Place the Child Restraint System on a
rear seat and route the lap/ shoulder
belt around or through the Child
Restraint System.
2. Fasten the lap/shoulder belt latch into
the buckle.
To Next Page
Loading...
