4121
Features of your vehicle
Using CD Player
1. CD Eject Button
• Press button to eject the
CD. This button works regardless
of ignition switch status.
2. Button (CD)
If the CD is loaded, turns to CD
mode. If no CD, it displays “No
Media” for 3 seconds and returns to
the previous mode.
3. Button (RANDOM)
Press this button for less than 0.8
seconds to activate ‘RDM’ mode and
more than 0.8 seconds to activate
‘ALL RDM’ mode.
• RDM : Only files/tracks in a fold-
er/disc are played back in a ran-
dom sequence.
• ALL RDM (MP3/WMA Only) : All
files in a disc are played back in the
random sequence.
4. Button (REPEAT)
Press this button for less than 0.8
seconds to activate 'RPT' mode and
more than 0.8 seconds to activate
'FLD RPT' mode.
• RPT : Only a track (file) is repeat-
edly played back.
• FLD RPT (MP3/WMA Only) : Only
files in a folder are repeatedly
played back.
5. Button
Play each song in the CD for 10 sec-
onds. To cancel SCAN Play, press
this button again.
6. CD Slot
Insert a CD label side up and gently
push in while ignition switch is on
ACC or ON. The audio automatically
switches to CD mode and begins to
play the CD.
If the audio was turned off, audio
power will automatically turned on as
the CD is inserted.
• This audio only recognizes 12cm-
size, CD-DA (Audio CD) or ISO
data-CD (MP3 CD).
• If UDF data-CD or non-CD (e.g.
DVD) is inserted, "Reading Error"
message will be displayed and the
disc will be ejected.
Do not insert a CD if CD indicator is
lit.
SCAN
2
1
CD/AUX
To Next Page
Loading...
Need help?
General
