SOUL FEATURES & FUNCTIONS GUIDE
38
*IF EQUIPPED
OTHER KEY FEATURES
(Lever located on the driver’s floor
near door sill)
A
C
Tire Mobility Kit Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website.
Refer to page 2 for more
information.
www.youtube.com/KiaFeatureVideos
B
A
QR CODE
B
Hood Release Lever and Latch
Opening the Hood:
1. Located on the bottom left of the driver’s
panel, pull the Hood Release Lever
A
to
unlatch the Hood
2. In the front of the vehicle, lift the Hood
slightly, push the secondary Latch
B
up
inside of the Hood’s center and lift the Hood
Closing the Hood:
Lower the Hood by pressing the front center of the Hood. Then, press
down to securely lock in place.
REMINDERS:
• While lowering and closing, keep hands away from under the Hood
• Open the Hood only after turning the engine off, on a flat surface, with the gear shift in
P (Park) position and setting the parking brake.
Fuel Door Release Lever
Lift the
C
lever upwards to release the fuel door.
Tire Mobility Kit
The Tire Mobility Kit may temporarily seal
certain types of tire damage.
For operational information, please refer to
section 6 of your Owner’s Manual.
A
Sealant Bottle
B
Compressor
•
• The Tire Mobility Kit is a temporary fix
and is to be used for one tire only; the tire
should be inspected as soon as possible
• The kit should only be used for sealing/
inflating passenger car tires; do not use
for inflating any other type of tires
• Some damaged tires cannot be sealed
completely; do not use the kit if a tire is
damaged beyond repair
QUICK TIPS
REMINDERS:
• The Tire Mobility Kit requires
the use of the 12V/15A/180W
Power Outlet, which is located
on the right side of the outlet/
aux port area
• After tire is properly sealed, drive
cautiously at a maximum speed
of 50 mph for no longer than a
maximum distance of 120 miles
To Next Page
Loading...
Need help?
General
