(Continued)
If not, the improperly fastened seat
belt
will not be able to provide pro‐
tection.
Rear center seatbelt :
Pull the metal tab (3) and insert it (3)
into
the buckle (4). There will be an au‐
dible “click” when the tab locks into the
buckle. Make sure the belt is not twis‐
ted. When using the rear center seat
belt the buckle with the “CENTER” mark
must be used.
To release the seat belt:
The seat belt is released by pressing
the
release button (A) on the locking
buckle. When it is released, the belt
should automatically draw back into
the retractor.
If this does not happen, check the belt
to be sure it is not twisted, then try
again.
Safety features of your vehicle
3-18
To Next Page
