KIBI KPW102 - DIMENSIONS; Product Dimensions; PARTS; Component Identification

DIMENSIONS
PARTS
21
3 4
Install waste system (not included) and check
for leakage.
Screw tail piece onto drain using the tail
washer.
Insert thick silicone washer and hard
washer over the exposed mail threaded
area and screw drain nut onto drain. Do not
overtighten.
Remove all components from drain piece
including: thin and thick silicone washer, hard
washer, drain nut and tail piece.
Insert drain and thin silicone washer into basin.
Apply Teflon to the exposed male threading
area of drain piece.
INSTALLATION
1 Drain
2 Thin Rubber Washer
3 Thick Rubber Washer
4 Hard Washer
5 Drain Nut
6 Tail piece
1
2
4
3
5
6
1-4/16”
(Φ32 mm)
2-7/16
(max 62 mm)
G1-1/4
2-10/16”
(Φ66 mm)
3-4/16”
(83 mm)
4-11/16”
(119 mm)
1-4/16”
(Φ32 mm)
2-7/16
(max 62 mm)
G1-1/4
2-7/16”
(Φ62 mm)
3-4/16”
(83 mm)
4-11/16”
(119 mm)