Need help?Do you have a question about the KickAss KADCDC25A-AND and is the answer not in the manual?
Lists charger model, input/output voltages, currents, power, and operating temperature.
Details capacity ranges, operation voltages, and isolator settings for different battery types.
Essential safety precautions and guidelines for installing the charger.
Guidance on positioning the charger for optimal performance and heat management.
Provides the physical measurements of the charger unit.
Specifies recommended cable sizes for various connections up to 8 meters.
Details wiring for the KADCDC25A-AND model using Anderson connectors.
Instructions for connecting the charger using only the solar input.
Visual representation of connecting the charger for dual battery systems.
Visual guide for connecting the charger using only solar power.
Step-by-step guide on how to select the correct battery type using the mode button.
Details the charging stages (Bulk, Absorption, Float, Pulse) for different battery types.
Explains the status and meaning of the LED indicators for solar, alternator, and charging.
Explains the BMS sleep mode and the charger's recovery function for lithium batteries.
Step-by-step guide to waking a lithium battery from sleep mode for recovery.
Describes the indicators shown when the charger is in lithium battery recovery mode.
Explains how error codes are displayed and lists common causes and remedies.
Directs users to the website for FAQs, troubleshooting, videos, and specifications.
General| Input Voltage | 100-240V AC |
|---|---|
| Output Voltage | 12V DC |
| Maximum Charging Current | 25A |
| Output Current | 25A |
| Battery Type | Lithium |
| Protection Features | Over-current, Over-voltage, Short-circuit |
| Compatibility | 12V |
To Next Page
