Kicker 47KSS - Page 12

EOP2021-CS17 REV-A.3
KSS Installation Guide
Page 12 of 28
POD MOUNTING THE TWEETER
A total of three items are needed to pod-mount the tweeter remotely:
1. Tweeter
2. Pod Housing
3. Wing Nut
Pod mounting of the tweeter creates a housing for the tweeter allowing it to be placed in
locations where the tweeter alone may not fit. The tweeter pod housing can be rotated 360
degrees about its post’s axis. The tweeter pod housing can also pivot side-to-side and front-to-
back.
360
°
55
°
50
°