To Next Page

To Previous Page

INSTALLATION

Step 1: Determine the location, placement, and mounting conﬁ guration of the KMFC cans onto the

surface to which you are mounting. The KMFC may be mounted to a ﬂ at surface at an angle of 0, ±5°,

or ±10°. Spreading the KMFC Loaded Marine Cans apart will provide better stereo performance, and is

usually preferable. When determining the best locations for mounting, be careful to look for obstacles or

obstructions that could complicate mounting the KMFC. Please keep in mind the routing of your speaker

wires as this can affect where you ﬁ nally mount your cans. You will need to mark and drill three holes in

the mounting surface at 5/16” (8mm) in diameter; two for the mounting bolts, and one for wire routing.

Use the included mounting hardware as a template. The placement of the holes must line up with the ﬁ nal

position of the mounting hardware; ie the holes should be about 90° from the direction the speakers will

be aimed and in-line with the wiring coming from the mounting bracket.

Step 2: Loosely thread the speaker and LED wires through the bottom of the mount base, mount wedge

(if applicable), mount gasket, mounting surface, and the mount plate that will be used to mount the KMFC.

The mounting hardware design provides versatility in vertical positioning to direct the speaker’s output to

the ideal listening position, with the following conﬁ gurations available. The mount base and mount wedge

may be rotated 180° from the diagrams shown below to aim the speakers at the opposite angle.

0 Degrees 5 Degrees 10 Degrees

Model: KMFC65 KMFC8

Rated Impedance [Ω] 4 4

Sensitivity [1W, 1m] 90 92

Peak Power Handling [ Watts] 195 300

Continuous Power Handling [Watts RMS] 65 150

Enclosure Diameter/Width [in, cm] 7, 17.8 8-3/16, 20.8

Enclosure Depth [in, cm] 9-11/16, 24.6 11-1/4, 28.5

SPECIFICATIONS

IMPORTANT: You must apply a thin layer of the included anti-seize compound to ALL threaded fasteners

before installation to prevent galling, corrosion, seizing, and to improve gasket performance.

Kicker KMFC65 User Manual

Questions and Answers: