Kicker PTRTP112 - Mounting

8English
Mounting
Choose a structurally sound location to mount your
KICKER powered subwoofer enclosure. Make sure
the mounting screws will not puncture the gas tank/
brake lines/wiring or interfere with any mechanical
parts on the underside of the mounting surface.
Choose a location that allows at least 4” (10cm) of
open ventilation for the amplifier. If possible, mount
the enclosure in the climate-controlled passenger
compartment. A flat surface is required.
If the supplied mounting hardware is not applicable
to your installation, some other means of securely
attaching the enclosure to the vehicle must be used.
Mount the brackets to the
bottom of the enclosure
using the supplied smaller
screws. Securely attach
the enclosure to the
vehicle with the supplied
larger screws.