Do you have a question about the Kicker BassStation PT8 and is the answer not in the manual?
Frequency Response (Lower) | 30 Hz |
---|---|
Impedance | 4 Ohms |
Frequency Response (Upper) | 120 Hz |
Type | Active Subwoofer |
Size | 8 inch |
Details dimensions, power ratings, and weight for different BassStation models.
Lists common specifications like frequency response, noise ratio, crossover, and phase.
Guides on selecting a secure mounting location and ensuring ventilation for the enclosure.
Illustrates the connections for power, ground, and audio inputs to the amplifier.
Explains the pinout for the quick-connect harness audio inputs (Left/Right channels).
Lists the specific fuse amperage required for each BassStation model (PT8, PT10, PH12, PHD12).
Details the two automatic turn-on modes: +12V Remote Turn-On and DC Offset Turn-On.
Explains how to use the phase switch to improve bass response by inverting the signal phase.
Describes setting input level and adjusting the variable crossover frequency for optimal sound.
Guides on setting input gain, using bass boost, and connecting the remote bass control.
Instructions on physically mounting the remote bass control unit and connecting its cable.
Diagnosing issues based on PWR/PRT LED status (off, green, or red) and no output.
Addresses common problems like no sound, low output, and engine-related noise.
Solutions for reduced bass response, ground loop noise, and proper grounding connections.
Safety warning regarding correct jumper cable connections during vehicle jump starts.
Details the 3-month (dealer) and 1-year (authorized dealer) warranty periods and terms.
Instructions on obtaining warranty service, including RMA numbers and return shipping.
Lists conditions and damages that are excluded from warranty coverage.
Information on the expected turnaround time for warranty repairs and service.
Advises contacting local dealers/distributors for country-specific warranty policies.
Critical warning about the risk of permanent hearing damage from high sound levels.