To Next PageTo Next Page
Need help?Do you have a question about the Kicker Solo-Baric S8L7 and is the answer not in the manual?
Provides strength and rejects stray magnetic fields for enhanced performance.
Cools the voice coil for continuous operation and ensures linear response.
Offers high internal damping and resistance to environmental factors.
Enhances cone resistance to flex under pressure for improved durability.
Prevents separation of cone and surround at high excursions.
Improves heat dissipation for superior durability and longer life.
Allows for high excursion and flexible wiring configurations.
Prevents voice coil meltdown, minimizing warping and rubbing.
Integrates pole piece and back plate for effective heat transfer and operation.
Resists lead breakage and power-robbing resistance losses.
Ensures solid connections for large gauge speaker wire.
Provides an airtight seal for optimal enclosure performance.
Lists enclosure designs to avoid for optimal performance and to prevent woofer failure.
Provides minimum and maximum recommended enclosure volumes for each Solo-Baric model.
Details how recommended enclosures affect power handling and bass response.
Shows example panel dimensions for building minimum enclosure sizes.
Specifies corner radius requirements for subwoofer mounting cutouts.
Provides rules for solid, airtight cabinet construction using specific materials and joinery.
Recommends bracing to reduce panel vibration and explains air space considerations.
Details terminal cup recommendations and sealing methods for airtightness.
Advises against using silicone on the woofer opening to avoid voiding the warranty.
Suggests using polyester fiber material to fill the box halfway for smoother response.
Explains the dual 2 Ohm and dual 4 Ohm voice coil options and load possibilities.
Illustrates how to wire the voice coils in parallel to achieve specific impedance loads.
Illustrates how to wire the voice coils in series for different impedance loads.
Presents key technical specifications for S15L7, S12L7, S10L7, and S8L7 models.
Details the one-year (or 90-day for B-Stock) warranty period from date of original purchase.
Clarifies that warranty is for original purchaser only and may vary by state law.
Outlines steps for returning defective merchandise for warranty service.
Lists specific conditions and damages that are excluded from warranty coverage.
States the goal of 24-hour service for returns, with potential delays.
Directs users to contact international dealers for country-specific warranty policies.
Warns about potential hearing damage from high sound levels and advises common sense.
General
