Kicker SOLO-BARIC S15L7

To Next Page

Congratulations! You have just purchased one of the most advanced

subwoofers in the history of car audio. Your KICKER Solo-Baric is the latest in

KICKER’s trend-setting Solo-Baric line, designed and engineered to deliver the

ultimate in low bass performance and unmatched durability when installed

in a properly designed system. Thanks for buying KICKER. Enjoy.

Solo-Baric Features

Cast Aluminum Basket (patent pending) for strength and to reject stray

magnetic fields

Perimeter Venting in basket for continuous voice coil cooling and highly

linear response

Highly Rigid Cone (patent pending) with high internal damping and excellent

resistance to sunlight, pollution, and moisture

Inverted Structural Dome™ further increases cone’s resistance to flex

under pressure

Stitched Surround (patent pending) prevents cone/surround separation at

high excursions

Blackened Motor Parts for superior heat dissipation and long life

Dual Ultra-Length Voice Coils for high excursion and flexible wiring options

High-Temp Kapton Voice Coil Former prevents cone meltdown to minimize

warping and rubbing

One piece UniPlate™ pole piece and back plate:

Blackened Pole Piece provides effective heat transfer and cool operation for

maximum power handling

One-Piece Hyper-Extended Pole reduces non-linear magnetic fields around

the voice coil gap for even more heat sinking and excellent cone motion control

Vented Pole Piece releases pressure under dustcap for freer cone motion and

enhanced low bass

Sleeved High-Power Tinsel Lead Wires to resist lead breakage and

power-robbing resistance losses

Spring-Loaded Nickel Plated Terminals for solid connections with large gauge

speaker wire

Rubatex front and rear gaskets for airtight seal



S15L7, S12L7, S10L7, S8L7

Main Page

Need help?

Do you have a question about the Kicker SOLO-BARIC S15L7 and is the answer not in the manual?

Summary

RECOMMENDED ENCLOSURES

A Note on Power Handling Capability

Discusses how enclosure size affects subwoofer power handling and bass response.

BUILDING YOUR ENCLOSURE

WIRING

SPECIFICATIONS

SPEAKER SYSTEMS LIMITED WARRANTY

WHAT TO DO IF YOU NEED WARRANTY OR SERVICE

Outlines the procedure for obtaining warranty service and returning defective merchandise.

WHAT IS NOT COVERED?

Lists conditions and damages that are excluded from the limited warranty coverage.

HOW LONG WILL IT TAKE?

Provides an estimate of the service turnaround time for warranty claims.

INTERNATIONAL WARRANTY

Directs users to contact local dealers for specific international warranty policies.