3
Attach Front Wheels
1. Slide a large washer onto the
axle. NOTE: Washer may already
be on the axle.
Locate a wheel marked
“FRONT”. Slide a wheel onto
the axle with “FRONT” facing
toward vehicle.
Then slide a wheel cover
onto the axle, fitting the three
locating pins into the holes.
2. Slide a small washer onto
the axle.
Attach a nut onto the axle and
tighten snugly with the nut
wrench until you can see about
two threads on the axle. Do not
overtighten.
3. Align the pins in the hubcap
with the holes in the wheel
core. Press hubcap into place.
NOTE: Do not use a hammer.
Repeat steps 1-3 to attach the
other front wheel.
1
2 2a
3
To Next Page
Loading...
