To Next PageTo Next Page
Need help?Do you have a question about the Kidde 8LLCO and is the answer not in the manual?
General| Type | Carbon Monoxide Alarm |
|---|---|
| Sensor Type | Electrochemical |
| Test Button | Yes |
| LED Display | Yes |
| Power Source | Battery |
| Battery Type | AA |
| Operating Temperature | 40°F (4.4°C) to 100°F (37.8°C) |
| Operating Humidity | 10% to 95% relative humidity (non-condensing) |
| Audible Alarm | 85 dB at 10 feet |
| Alarm Response Time | 60-90 minutes at 50 ppm |
| Warranty | 10-year limited warranty |
Outlines immediate actions for CO alarm, including evacuation and calling emergency services.
Introduces the CO alarm as part of home safety and its function.
Emphasizes CO alarm limitations, not a smoke alarm substitute, and sensor location.
Specifies use in living units, not for compliance, and electrical power requirement.
Provides guidance on recycling waste electrical products.
Explains CO as a colorless, odorless, tasteless, fatal gas that inhibits oxygen.
Details mild, medium, and extreme symptoms of carbon monoxide exposure.
Explains dangerous, high, mid, and low CO concentration levels for the 8LLDCO model.
Lists household appliances and vehicles as primary sources of CO.
Covers vehicles, grills, and environmental factors causing transient CO situations.
Details specific CO producing factors in recreational vehicles.
Explains what CO alarms can and cannot do, including limitations and operational life.
Highlights key indicators like LEDs and buttons for both models.
Describes the warning signal indicating the alarm needs replacement after 10 years.
Lists operating temperature, humidity, alarm sound, sensor, and power details.
Details the time it takes for the alarm to sound at various CO concentrations.
Advises on optimal placement of CO alarms in living areas and bedrooms.
Lists areas unsuitable for installation to prevent nuisance alarms or damage.
Notes the sealed unit, permanent batteries, and activation process.
Provides step-by-step instructions for wall mounting and tabletop placement.
Describes the provided label for recording emergency service numbers.
Details the normal operation, alarm patterns, and status indicators for the 8LLCO model.
Explains the initial start-up sequence and normal monitoring display for the 8LLDCO model.
Describes various LCD displays, audible alarms, and recommended actions.
Explains how to view and reset the highest recorded CO concentration.
Details the audible and visual signals indicating a CO alarm condition.
Provides instructions for weekly testing and monthly cleaning of the alarm.
Lists chemicals and substances that can damage the sensor or cause false readings.
Describes the procedure to disable the alarm at the end of its useful life.
Outlines the warranty period, coverage, exclusions, and how to make a claim.
Provides information on obtaining warranty service and customer support contacts.
