Your new Kidde battery powered CO alarm utilises sophisticated
electronic components to protect you and your family from the
dangers of CO. Unique features include red and green diagnostic
lights, battery status, and sensor health. Familiarise yourself with
these features:
Red Alarm Indicator Light
If a dangerous level of carbon monoxide is detected by your
Kidde alarm, the red alarm LED will light continuously and a
loud (85decibel) alarm will sound. See figure 2.
See page 13-14 for an
understanding of which CO
levels are dangerous.
Green Operate Indicator Light
The green light flashing every 30 seconds indicates the unit is
functioning properly (see figure 3).
The green light will flash before a CO reading is taken and
when any button is pressed.
If the unit chirps once every 30 seconds, observe the unit for
the following:
A chirp every 30 seconds, with a green LED flash followed by
a red LED flash, indicates the batteries are low. Follow the
battery installation/replacement instructions on page 9 and 10.
A chirp every 30 seconds, with a red flash and no green LED
flash indicates a unit error. If the unit does not respond, call
Kidde on 0800 917 0722.
7
Features and Operation
Figure 2
To Next Page
Loading...
Need help?
General
