Installation
8
• After selecting the proper smoke alarm location as described
previously, hold the mounting plate against the selected
installation location (wall or ceiling) and mark the center of the
holes with a pencil. To ensure aesthetic alignment of the alarm
with the hall-way, or wall, the “A” line on the mounting plate
should be parallel with the hallway when ceiling mounted, or
horizontal when wall mounted (Image 3A and 3B). Drill a
hole through the pencil marks and use the enclosed screws and
anchors to secure. Use 3/16” drill for anchor holes. Align the
alarm with the mounting plate and rotate clockwise (right) until
the unit is aligned.
To Next Page
Loading...
