EasyManua.ls Logo

Kidde i12060A User Manual

Kidde i12060A
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
A.C. Wire-in Single and/or Multiple Station (up to 24 Devices) Ionization
Smoke Alarm with 9 Volt Battery Back Up and HUSH
TM
Control to temporar-
ily silence nuisance alarms.
Thank you for purchasing this smoke alarm. It is an important part of your family’s
home safety plan. You can trust this product to provide the highest quality safety
protection. We know you expect nothing less when the lives of your family are at
stake. Kidde alarms and accessories CAN ONLY BE interconnected with other Kidde
alarms and accessories as well as specified brands and models of interconnect com-
patible alarms. Connection of Kidde products to a non-specified manufacturer’s
interconnect system, or connection with non-specified equipment from another
manufacturer into an existing Kidde system could result in nuisance alarming, fail-
ure to alarm, or damage to one or all of the devices in the interconnect system.
Refer to the User’s Guide supplied with each Kidde product for interconnect com-
patible models, brands, and devices. Refer to the wiring instructions in section 3 for
NFPA initiating device limits.
For model: i12060A
Manual P/N 820-0394-EN Rev. G
1260-7205-01
i12060A
For your convenience, write down the following information. If you call
our Consumer Hotline, these are the first questions you will be asked.
Smoke Alarm Model Number
(located on back of alarm):
Date Code (located on back of alarm): The
National Fire Protection Association (NFPA)
and the manufacturer recommend replacing
this alarm ten years from the date code.
Date of Purchase:
Where Purchased:
Smoke Alarm User’s Guide
1260-7205-01(820-0394G-EN)_v1.qxd:_ 2011.5.16 10:15 AM Page 1
Question and Answer IconNeed help?

Do you have a question about the Kidde i12060A and is the answer not in the manual?

Kidde i12060A Specifications

General IconGeneral
Modeli12060A
TypeIonization Smoke Alarm
Battery Backup9V Battery
InterconnectableYes
Test/Reset ButtonYes
Hush FeatureYes
Alarm Sound85 dB at 10 feet
Weight0.5 lbs
ColorWhite
Warranty10-year limited warranty
Power SourceHardwired

Summary

Recommended Locations for Smoke Alarms

Mobile Home Installation

Locations to Avoid

Installation Instructions

Battery Installation

Mounting Instructions

Tamper Resist Features

Smoke Alarm Tamper Resist Feature

Prevents removal of the unit from its mounting bracket, enhancing security.

Battery Carrier Tamper Resist Feature

Secures the battery carrier, preventing unauthorized battery removal.

Operation and Testing

HUSH™ Control

Allows temporary silencing of the alarm for up to 8 minutes during nuisance alarms.

LED Indicators

Alarm Memory

Testing

Nuisance Alarms

Maintenance and Troubleshooting

Alarm Removal

Instructions on how to remove the smoke alarm from its mounting bracket.

Battery Installation and Removal

Details on how to install or replace the 9V battery in the smoke alarm.

Cleaning Your Alarm

Limitations of Smoke Alarms

Good Safety Habits

What to Do When the Alarm Sounds

NRC Information

NFPA Required Protection

Caution (California State Fire Marshal)

Service and Warranty

Ten Year Limited Warranty

Related product manuals