Kidde I12020 - User Manual

AC Wire-in Single and/or Multiple Station (up to 24 Devices) Ionization Smoke
Alarm with SMART HUSH
TM
Control to temporarily silence nuisance alarms.
Models i12040 and i12080 have a 9-Volt Battery Back Up and the model i12080
has a battery powered safety light.
Thank you for purchasing this smoke alarm. It is an important part of your family’s
home safety plan. Y
ou can trust this product to provide the highest quality safety pro-
tection. We know you expect nothing less when the lives of your family are at stake.
Kidde alarms and accessories CAN ONLY BE interconnected with other Kidde alarms
and accessories as well as specified brands and models of interconnect compatible
alarms. Connection of Kidde products to a non-specified manufacturer’s interconnect
system, or connection with non-specified equipment from another manufacturer into
an existing Kidde system could result in nuisance alarming, failure to alarm, or dam-
age to one or all of the devices in the interconnect system. Refer to the User’s Guide
supplied with each Kidde product for interconnect compatible models, brands, and
devices. Refer to the wiring instructions in section 3 for NFPA initiating device limits.
For models:
i12020, i12040, i12080
Manual P/N 820-1183 Rev. B 11/2006
i12020
i12040
i12080
For your convenience, write down the following information. If you call
our Consumer Hotline, these are the first questions you will be asked.
Smoke Alarm Model Number
(located on back of alarm):
Date Code (located on back of alarm): The
National Fire Protection Association (NFPA)
and the manufacturer recommend replacing
this alarm ten years from the date code.
Date of Purchase:
Where Purchased:
Smoke Alarm User’s Guide

Summary

Recommended Locations for Smoke Alarms

Installation Instructions

Wiring Requirements

Specifies electrical requirements, connection standards, and warnings for wiring smoke alarms for safe and proper operation.

AC Quick Connect Harness Wiring

Step-by-step guide for connecting the AC power harness, including single station and interconnected setups.

Battery Installation and Removal

Mounting Instructions

Operation and Testing

Testing Procedures

Details how to test the smoke alarm's functionality weekly and what to do if it malfunctions.

Maintenance

Alarm Removal and Battery Replacement

Steps for safely removing the alarm and replacing its 9V backup battery, listing compatible battery types.

Limitations of Smoke Alarms

Good Safety Habits

What to Do When the Alarm Sounds

Service and Warranty

Kidde I12020 Specifications

Power

power source	120VAC (80mA)
interconnects	Up to 24 Kidde devices
resistance of interconnect wiring	Maximum of 10 ohms

Operating Environment

temperature range	40˚F (4.4˚C) to 100˚F (37.8˚C)
humidity range	5%-95% relative humidity (RH)
audio alarm	85dB at 10ft

Weight and Dimensions

diameter	5.6 inches
depth	1.55 inches
weight	0.5 lbs