Kidde i12060 - User Manual

A.C. Wire-in Single and/or Multiple Station (up to 24 Devices) Ionization
Smoke Alarm with 9 Volt Battery Back Up and SMART HUSH
TM
Control to
temporarily silence nuisance alarms.
Thank you for purchasing this smoke alarm. It is an important part of your family’s
home safety plan. Y
ou can trust this product to provide the highest quality safety
protection. We know you expect nothing less when the lives of your family are at
stake. Kidde alarms and accessories CAN ONLY BE interconnected with other Kidde
alarms and accessories as well as specified brands and models of interconnect com-
patible alarms. Connection of Kidde products to a non-specified manufacturer’s
interconnect system, or connection with non-specified equipment from another
manufacturer into an existing Kidde system could result in nuisance alarming, fail-
ure to alarm, or damage to one or all of the devices in the interconnect system.
Refer to the User’s Guide supplied with each Kidde product for interconnect com-
patible models, brands, and devices. Refer to the wiring instructions in section 3 for
NFPA initiating device limits.
For model: i12060
Manual P/N 820-0394-EN Rev. D
i12060
For your convenience, write down the following information. If you call
our Consumer Hotline, these are the first questions you will be asked.
Smoke Alarm Model Number
(located on back of alarm):
Date Code (located on back of alarm): The
National Fire Protection Association (NFPA)
and the manufacturer recommend replacing
this alarm ten years from the date code.
Date of Purchase:
Where Purchased:
Smoke Alarm User’s Guide

Summary

Recommended Locations for Smoke Alarms

Locations to Avoid

Installation Instructions

Wiring Requirements

Specifies electrical and interconnect wiring standards for installation.

AC Quick Connect Harness Wiring

Details connecting the AC power and interconnect wires to the alarm.

Operation and Testing

Alarm Operation Basics

Describes how the alarm functions when sensing combustion products.

Smart Hush Control

Temporary desensitization of the alarm for nuisance alarms.

LED Indicators

Maintenance

Limitations of Smoke Alarms

Good Safety Habits

Develop and Practice Escape Plan

Actions When Alarm Sounds

Kidde i12060 Specifications

General

Sensor Type	Ionization
Hush Feature	Yes
Test Button	Yes
Alarm Sound Level	85 dB at 10 feet
Warranty	10-Year Limited Warranty
Color	White
Power Source	120 V AC
Interconnectable	Yes, up to 24 devices
Battery Backup	9V
Operating Temperature	40°F (4°C) to 100°F (38°C)
Humidity Range	Up to 85% non-condensing
LED Indicator	Yes
Weight	0.5 lbs