Kidde i12060 Specifications

120V AC/DC Wire-in Smoke Alarm
Front Battery Door
Part Number 21006376 Model i12060
Description
The Kidde i12060 is an AC/DC powered, ionization
smoke alarm that operates on a 120V power source
with 9V battery backup.
This alarm uses ionization sensing technology. Ionization
sensing alarms may detect invisible fire particles
(associated with flaming fires) sooner than photoelectric
alarms. Photoelectric sensing alarms may detect visible
particles (associated with smoldering fires) sooner than
ionization alarms.
Kidde strongly recommends that both ionization
and photoelectric smoke alarms be installed to help
insure maximum detection of the various types of fire
that can occur within the home.
The front-loading battery door allows user to change
the battery without removing the alarm from the
mounting bracket making battery replacement easy
and convenient. This smoke alarm is available in a
6-piece cut case with tray for easy display as well as
a 6-piece bulk pack for contractors and property
owners. This unit is a UL Listed product with a 10-year
limited warranty.
Install Confidence:
Easy Installation
•Frontbatterypulltaballowsbatteryactivationwithout
removing alarm from mounting bracket.
•Largemountingbasemakesmountingeasier,protects
surface paint from dirt and covers imperfections.
•Pre-strippedwiringharnesswitheasyoffcapdoes
not require stripper tool. Tinned strands increase
conductivity and wire nut grip
Fewer Callbacks
•Frontbatterydoormakesreplacingthebattery
easy for anyone.
•Onebuttondesignforeasyoperationandless
confusion.OperatesSmartHush™andalarmtest
•Batteryrundownprotectionwillshutdownalarm
memory when AC power is not present, reducing
low battery chirp.
•Dustcoverprotectssensorfromcontaminatesduring
construction reducing nuisance alarms
User-Friendly Features
•Tamperresistlockingfeaturedetersalarmtheft
•AlarmmemoryflashesredLEDindicatingwhichunit
was the initiating alarm in interconnected system.
•Batterybackupprovidesprotectionincaseof
power failure
•Interconnectablewithupto24devices(ofwhich18
canbeinitiating)includingsmoke,COandheatalarms.
Seeuser’sguideforcompleteinstructions
– Ionization Sensing Technology
– Front Loading Battery Door
– One button design (operates Smart Hush™ and test)
– Large mounting base
– 9V Battery Backup (included)
– Tamper resist feature
– Alarm memory
– Pre-stripped wiring harness with tinned strands
U
L
SIGNALING
LISTED

Kidde i12060 Specifications

General

Sensor Type	Ionization
Hush Feature	Yes
Test Button	Yes
Alarm Sound Level	85 dB at 10 feet
Warranty	10-Year Limited Warranty
Color	White
Power Source	120 V AC
Interconnectable	Yes, up to 24 devices
Battery Backup	9V
Operating Temperature	40°F (4°C) to 100°F (38°C)
Humidity Range	Up to 85% non-condensing
LED Indicator	Yes
Weight	0.5 lbs