To Next PageTo Next Page
Need help?Do you have a question about the Kidde i12020ACA and is the answer not in the manual?
General| Model | i12020ACA |
|---|---|
| Type | Ionization Smoke Alarm |
| Test/Reset Button | Yes |
| Hush Feature | Yes |
| Alarm Sound Level | 85 dB at 10 feet |
| LED Indicator | Yes |
| Weight | 0.5 lbs |
| Warranty | 10-year limited warranty |
| Battery Backup | 9V battery |
| Interconnectable | Yes |
| Tamper Resistant | Yes |
| Operating Temperature | 40°F (4°C) to 100°F (38°C) |
| Operating Humidity | 10% to 95% relative humidity (RH), non-condensing |
| Mounting Type | Ceiling/Wall |
| Power Source | AC Wire-In |
Guides on where to place smoke alarms for optimal coverage and safety.
Details places where smoke alarms should not be installed to prevent false alarms or malfunction.
Installation advice tailored for mobile homes due to insulation differences.
Instructions on how to properly connect the smoke alarm to AC power and interconnect wiring.
Step-by-step guide for physically attaching the smoke alarm to the mounting plate.
Explains the battery backup function and requirements for specific models.
Instructions for testing the smoke alarm after installation to ensure proper function.
Describes how to use the tamper-resist locking pin to secure the alarm.
How to temporarily silence nuisance alarms caused by non-hazardous conditions like cooking.
Explains the meaning of green and red LEDs, including alarm memory indication.
Procedures for weekly testing to ensure the alarm is functioning correctly.
Steps on how to detach the smoke alarm from its mounting plate.
Details on how and when to replace the battery in the smoke alarm.
Recommendations for developing good safety habits, including escape plans.
Steps to follow in case of a fire alarm to safely exit the premises.
Information about the radioactive element used in ionization smoke alarms and its safety.
Further recommendations for smoke alarm placement based on NFPA standards.
