Kidde SA-ETH

2 / 2 P/N 3101100-EN • REV 006 • ISS 12JAN21
Specifications
Ethernet
10/100 Base-T
Connection mode
Auto negotiation
Operating voltage
24 VDC
Operating current
Standby/Alarm: 34 mA
Max.: 41 mA
Max. wire runs
200 feet (60 m), Cat 5 cable (panel to
communication equipment)
Cat 5 cable connector
RJ-45
IP address (default)
192.168.001.003
Subnet mask (default)
255.255.255.0
Gateway (default)
000.000.000.000
Operating environment
Temperature
Relative humidity
32 to 120°F (0 to 49°C)
0 to 93% noncondensing at 90°F (32°C)
Regulatory information
FCC compliance
This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Environmental
class
UL: Indoor dry
Contact information
For contact information, see www.edwardsfiresafety.com.
firealarmresources.com