10. Remove / replacing the covers
10.1 Removing the sunshade
In order to be able to detach the sunshade cover, pull it out behind the
headrest and unhook the strap.
10.2 Removing the inlay cover
Undo the buckle and detach the two Velcro straps that are underneath the
shoulder belts.
Now you can pull the inlay cover off the shoulder belts.
10.3 Removing the seat cover
Place your Kiddy evolution pro in the lay-back position and pull the cover
down from the seat toward the foot end of the buckle. Make sure that the
seat cover is attached to the seat with Velcro.
10.4 Replacing covers
To replace the covers proceed in the reverse order as described for
removing the covers (point 10.1 - 10.3). When you remount the cover,
ensure that the belts are not twisted or have become lodged!
11. Cleaning the seat covers
The covers can be washed at 40 degrees with a washing machine set to the
gentle or delicates cycle. Do not use the spinning cycle and do not tumble
dry.
12
ENG
To Next Page
Loading...
