EasyManua.ls Logo

KIDDY Evolution Pro 2 - User Manual

KIDDY Evolution Pro 2
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Infant Carrier
INSTRUCTION MANUAL
EN / DE / ES / FR / IT / PT / PL / NL Booklet 1

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the KIDDY Evolution Pro 2 and is the answer not in the manual?

Summary

Description of Components

Introduction

Suitability

General Safety Instructions

General Use and Adjustments

Functions of the Carry Handle; Adjusting the Reclined Position

Adjust the carry handle by pressing buttons and swiveling it into the desired position.

Using the Newborn Inlay

Use the comfort inlay for babies up to 6 months; remove it by opening the buckle and detaching from shoulder belts.

Using the Sunshade

Extend sunshade by pulling towards the foot end; retract by pushing towards the head end.

Buckling and Unbuckling the Baby

Loosening the Belt System

Turn carry handle to carry position; loosen belt system by pressing central adjuster and pulling shoulder belts.

Adjusting the Height of the Belt System

Open front cover, turn height adjuster 90° clockwise, and move handle to desired upward or downward position.

Buckling and Unbuckling the Baby

Buckle child by placing shoulder belts over shoulders, inserting tongues into buckle, and tightening central belt snugly.

Use in the Vehicle

In-Vehicle Installation with Seat Belt

Install seat facing rear on a seat with a 3-point belt, ensuring no active front airbag.

Seat Selection for Seat Belt Installation

Read vehicle manual for information on using child restraint systems.

Installation Steps with the Seat Belt

Place seat facing rear with handle in carry position on a seat with a 3-point belt.

Installation with the Isofix Platform

Install carrier using the Isofix platform as per vehicle and platform instructions.

Seat Selection for Isofix Installation

Consult vehicle manual and type list for compatible Isofix seats.

Installation Steps on the Isofix Platform

Mount the Isofix platform in the vehicle per its manual. Then place the carrier onto the platform.

Removal from the Isofix Platform

Release carrier by pulling the handle and lifting it from the Isofix platform.

Use on a Stroller

Use as a Rocker

Remove and Replacing the Covers

Removing the Sunshade

Detach loops, press clips, and pull sunshade upwards to remove. Detach fabric from frame by undoing loops.

Removing the Backrest Cover

Undo velcro fasteners and detach the backrest cover from the belt height adjustment.

Removing the Seat Cover

Place seat in lay-back position and pull cover off velcro and through the seat.

Replacing Covers

Replace covers in reverse order of removal, ensuring belts are not twisted.

Care and Maintenance

Cleaning the Seat Covers

Clean seat covers following stitched care instructions and advice symbols for the specific fabric.

Cleaning Plastic Parts

Clean plastic parts with mild detergent or damp cloth; avoid aggressive cleaning agents.

Cleaning the Belt System

Clean the belt system with a damp cloth only; do not use detergent.

Steps to Take After an Accident

Warranty

KIDDY Evolution Pro 2 Specifications

General IconGeneral
Minimum child weight3.5 kg
Product TypeBaby Carrier
ModelEvolution Pro 2
BrandKIDDY
Adjustable StrapsYes
Adjustable featuresAdjustable seat width
TypeBaby Carrier
Carrying PositionsFront carry (facing in), Front carry (facing out), Back carry
Head SupportYes
Hip BeltYes
Machine WashableYes
Recommended Age0 - 36 months

Related product manuals