EN
18
10.2 Removing the backrest cover
Undo the buckle and detach the two velcro’s which are located at the
sides of the shoulder pad’s. Detach the cover from the belt height
adjustment on the backrest. Pull the backrest cover o the shoulder
belts.
10.3 Removing the seat cover
Place the Evolution Pro 2 in the lay-back position and pull the cover
o the velcro’s front seat and the buckle through the seat cover.
10.4 Replacing covers
To replace the covers proceed in the reverse order as described for
removing the covers (point 10.1–10.3). When you remount the cover,
ensure that the belts are not twisted or have become lodged!
11. Care and maintenance
11.1 Cleaning the seat covers
For cleaning of the covers, please follow the stitched care instructions
for the particular fabric part and follow advice symbols.
11.2 Cleaning plastic parts
Plastic parts can be cleaned with a mild detergent or with a damp
cloth. Never use aggressive cleaning agents (e.g. solvents).
11.3 Cleaning the belt system
e belt system can be cleaned with a damp cloth. Do not use
detergent!
To Next Page
Loading...
