KIDDY Isofix Base 2 - Removing Isofix Base 2; Adjusting Isofix Base 2 Carriage

EN
8
Traces of use or discolouration can appear on some vehicle seat cov-
ers made from sensitive materials (e.g. velour, leather etc.) if car seats
or platforms are used. To avoid this we recommend to place a seat
cover shield or protection mat underneath the product.
5. Removal
First remove the Kiddy child seat according to its instructions from the
Isox platform.
Now you can start to dismantle the platform.
Push both Isox release buttons to the inside (g. 4, no. 1) and pull
both forward simultaneously (g. 4, no. 2), now pull the platform from
the anchor ttings forward (g. 4, no. 3).
Now you can slide the support foot in by swinging the support leg
xing cover backwards (g. 5, no. 1) and pushing the support foot into
the support leg (g. 5, no. 2). You can now fold the support leg under
the platform.
6. Adjusting the carriage
e carriage can be moved forwards and backwards.
Push the slide releases at the knee of the platform to the back
(g. 6, no. 1) and pull or push the carriage in the desired direction at
the same time (g. 6, no. 2).
Let go of the slide release. e next possible locking position can be
found by moving the carriage. Make sure that the carriage locks into
place again and that the indicator shows green (g. 6, no. 3).